<span id="zfqta"><sup id="zfqta"></sup></span>

    1. <span id="zfqta"></span>
    2. <span id="zfqta"><output id="zfqta"></output></span>

        頂部鏈接&語言切換

        Time of issue:2021-09-16 17:43:45
        imgboxbg

        Products

        SARS-CoV-2 Antigen Rapid Test Kit (Saliva)
        1/1
        Number of views:
        1000
        The PocRoc? SARS-CoV-2 Antigen Rapid Test Kit(Saliva)is used for qualitative?detection of SARS-CoV-2 virus nucleocapsid protein in human saliva samples. The detection of SARS-CoV-2 nucleocapsid protein antigen is helpful for the early detection of novel coronavirus pneumonia infection in the latent period. and can be used to assist the diagnosis of novel coronavirus infection. For Medical Professional Use Only!
        Number of views:
        1000
        Product serial number
        Quantity
        -
        +
        1
        Product Description
        產品詳細右側內容:

        The PocRoc? SARS-CoV-2 Antigen Rapid Test Kit(Saliva)is used for qualitative?detection of SARS-CoV-2 virus nucleocapsid protein in human saliva samples. The detection of SARS-CoV-2 nucleocapsid protein antigen is helpful for the early detection of novel coronavirus pneumonia infection in the latent period. and can be used to assist the diagnosis of novel coronavirus infection.

        For Medical Professional Use Only!

        Intended use

        The PocRoc® SARS-CoV-2 Antigen Rapid Test Kit(Saliva)is used for qualitative detection of SARS-CoV-2 virus nucleocapsid protein in human saliva samples. The detection of SARS-CoV-2 nucleocapsid protein antigen is helpful for the early detection of novel coronavirus pneumonia infection in the latent period. and can be used to assist the diagnosis of novel coronavirus infection.

        For Medical Professional Use Only!

         

        Product Information

        Production name

        Test samples

        Specifications

        PocRoc® SARS-CoV-2 Antigen Rapid Test Kit(Saliva)

         human saliva samples

        1T/Kit, 5T/Kit, 25T/Kit

         

         

        Storage Conditions

        All reagents are ready to use as supplied. Unopened reagent kits are stable at 4°C ~30°C for 24 months tentatively. It should be used within 1 hour once the pouch is opened. Do not freeze the kit or expose the kit above 37°C during storage.

         

        Test Procedure

        Saliva samples collection from deep throat:

        1、Cleaning your mouth with water before collecting saliva samples from deep throat.

        2、Holding the paper cup and the cough deeply. Make the noise of "Kruuua" for 3-5 times from the deep throat . Once the saliva is enough in your mouth, then spit saliva (about 0.5 ml) into the paper cup.

        3、Place the extraction tube on the workbench. Add the total extraction reagent into the extraction tube.

        4、Transfer fresh 75μL saliva from the paper cup into the sample extraction tube, mix them completely about 1 minute for testing.

        Note: 1、Do not eat, smoke or chew gum 30 minutes before collecting saliva samples

                  2、Strictly following the instruction of saliva sample collecting from deep throat.

         

        Test Procedure

        1、Open the package and take out the test card.

        2、Install the beater on the extraction tube with saliva sample, put 80μL(three drops)into the sample well of the test card, and start the timer.

        3、Read the results in 20 minutes. A strong positive result can be reported within 20 minutes, but a negative result must be reported after 20 minutes, and the result after 30 minutes is not valid

        We could not find any corresponding parameters, please add them to the properties table

        底部版權信息

        Time of issue:2021-06-08 11:15:00

        Copyright©2021 Lumigenex (Suzhou) Co., Ltd. All Rights Reserved. Website construction: www.300.cn

        底部備案信息

        Time of issue:2021-09-17 09:20:58

        分享按鈕

        Time of issue:2021-09-17 11:04:49

           

        久久精品人人做人人综合,青青热久免费精品视频在大全,国产高潮刺激叫喊视频,国内大量揄拍人妻在线视频

          <span id="zfqta"><sup id="zfqta"></sup></span>

          1. <span id="zfqta"></span>
          2. <span id="zfqta"><output id="zfqta"></output></span>